4/15/2023 0 Comments Carving the filetools![]() The trusty #3-20mm gouge is helpful to do this as well. To bring the mustache forward, carve around the outside lines with your #11-15mm, removing material below and above the mustache. Draw in the shape of the wood spirit's mustache Step 7: Roughing in the Mustache and Hair Next, come in with a U shaped gouge, like the #9-10mm and clean up the plunge cut. Insert the corner edge of the wood carving tool and cut along the line of the nose. The second way to do this is with a plunge cut. ![]() This type of cut leaves a nice, clean transition out the other side of the cut. Learn how to do a sweeping cut to bring the bridge of the nose forward. Two Types of Cuts - The Sweeping Cut and the Plunge Cut Draw in the lines to mark where the bridge of the nose is going to be Next start to carve the angle of the nose Continue to clear away the material underneath using your larger #3- 20mm carving chisel Using your #12 V parting tools, come underneath the nose and create a line to define where the bottom of the nose is going to b Identify where the tip of the nose is going to be and draw a circle to represent the ball of the nose Using the #3-20mm gouge, bring down the forehead below the nose material With the #11-15mm, clear away the material on either side of the nose, up to the eyebrow ridge You can always pass through a second time to take off more material Smaller, shorter cutting motions are recommended. Horizontal cut along the "eyeline" creating the eyebrow ridge at the top How to draw your guiding lines with marker to proportion to set up the face carving Clear away material to create a semi-rounded surface How Do I Approach Bringing A Face Out of a Piece of Wood? If you don't have access to cottonwood bark, not a problem! Basswood, butternut, or any other type of material will work just fine, and the principles of face carving that Lucas is teaching are exactly the same. Recommended if you can find it (often available for purchase online in the US and Canada) ![]() With clamps, secure the second 2圆 (with your piece of carving wood) to the first 2圆 Next, using screws attach your piece of carving wood to a separate 2圆 Three 2x4s stacked on top of each other at the bottom What Tools Do I Need For This Type of Woodcarving? Next, Lucas will cover how he approaches bringing a face out of a piece of wood in the roughout stage. Then Lucas covers an easy way to set up and mount your project if you don't have a carving vise. In lesson 1, beginners will learn what tools they need to carve a face. In this Schaaf Tools Video Series, woodcarver Lucas Kost will take you through the process of carving a wood spirit from start to finish. Lesson 1 of 5 Did you enjoy this lesson? You can finish your wood carving project in the next videos, Lessons 2-5: ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |